Address: Lianxi Boulevard(M. Section), Jiujiang, Jiangxi, China
Phone: 0792-8352828
0792-8352066
Fax: 0792-8352666
Mail: jjyixin@jjyixin.cn
URL: www.jx-yixin.com
Website:www.canmakingmachine.net
Preparatory work before can sealing machine start work:
YIXIN can sealing machine has the following preparatory work before start work:
1, Any new machine before work should install electromagnetic safety switch to reduce the risk of power outages.
2, Notice the motor steering, if the steering error, should change the wiring position of any two line , it will change steeering.
3, The new confidential attention to can-off system adjustment.
can sealing machine adjust the nut of "foot-pedal jar hinge ear", so that "foot pedals" downward, by "push Rod" so that "the shaft cam" bottom edge and "roll" the upper edge of the tangent to a moderate. If the distance between the two is insufficient, the volume seal cannot be activated. If the distance between the two is too large. Then repeat the volume seal, can not be automatically off the cans, or the strength of can is uneven, will produce a sliding cans.
Hand support "prop can Shaft", and the other hand with the plate to remove the loose "prop jar shaft adjustment clamping screw." Foot pedal "feet" to raise the "tray". Place an empty jar, adjust the distance between the top of the "cupping tray" and the top part of the "rolling head", minus 1/8 for the height of lid , and then fasten the clamping screw.
4. Adjust the clearance between the first roll and the rolling head.
The company introduced advanced equipment manufacturing customers need to seal cans, canning equipment, automatic sealing tank machine and automatic vacuum filling nitrogen sealing machine
More about the knowledge of sealing machine please pay attention to Jiujiang Yixin Machinery Co., Ltd.: www. jx-yixin. com Consulting Hotline: 0086-792-8358866